Custom Photo Etched Stainless Steel Cutting Blades Medical Industrial OEM Etching Service
Product Details
| Product Name: | Custom Etched Cutting Blades | Process: | Photo Chemical Etching |
|---|---|---|---|
| Materials: | Stainless Steel, High-carbon Steel, Titanium And Other Alloys On Request | Thickness: | 0.02 Mm - 1.5 Mm |
| Tolerance: | ±0.01 Mm Achievable Depending On Material And Design | Cutting Edge: | Burr-free Etched Edge, Optional Honing |
| Hole Diameter: | Customized | Surface Finish: | Bright, Matte Or As Specified |
| Quality Control: | In-process Monitoring, Final Inspection, 100% Inspection On Request | ||
| Highlight |
Custom stainless steel cutting blades,OEM photo etched blades,Medical industrial etching service |
||
Product Description
Custom Photo Etched Stainless Steel Cutting Blades — OEM Etching Service
Overview
This service turns customer drawings into thin metal cutting blades using photo chemical etching. Instead of hard tooling, the blade outline, edge profile and any micro hole pattern are transferred from digital artwork onto a photoresist-coated metal strip and then etched in a controlled chemical bath. Because the process is non-contact, the blade is never punched, ground or heat-affected during shaping, so the etched edge stays clean and the material keeps its original grain structure.
The service is intended for OEM teams that need medical, surgical, laboratory or industrial cutting blades in stainless steel and other thin alloys, from first evaluation builds through repeat production batches.
Blade Types We Etch
- Surgical and biopsy blades – slim profiles, fine tips, small mounting features.
- Dermatological and laboratory blades – thin sections with tight edge geometry.
- Industrial cutting blades – film, tape, foil, textile, paper and packaging converting.
- Trimmer and specialty blades – multi-slot bodies with integrated locating holes.
- Micro blades and custom cutters – miniature parts that are difficult to stamp or machine.
Etching Workflow
- Drawing and DFM review – we check blade outline, edge geometry, hole spacing, material and thickness against etching limits.
- Material selection and cleaning – stainless steel, high-carbon steel or the alloy agreed with the customer, degreased before coating.
- Photoresist lamination – a light-sensitive film is bonded to both faces of the strip.
- Exposure and development – the blade pattern is imaged from digital artwork, so design changes need no new hard tooling.
- Controlled etching – exposed metal is dissolved to form the blade profile and edge in one operation.
- Resist stripping and cleaning – the resist is removed and the parts are rinsed and dried.
- Optional secondary operations – honing, hardening or coating routes can be arranged when the application requires them.
- Inspection and packing – dimensional and edge checks, then packing according to the agreed handling requirement.
Capability Snapshot
| Process | Photo chemical etching (single or double sided) |
| Materials | Stainless steel, high-carbon steel, titanium and other thin alloys on request |
| Thickness range | 0.02 mm to 1.5 mm |
| Dimensional tolerance | ±0.01 mm achievable depending on material and design |
| Edge condition | Burr-free etched edge, optional honing to suit the cutting duty |
| Hole and slot features | Micro holes, slots and lubrication or clearance patterns etched in the same step |
| Surface finish | Bright, matte or as specified |
| Marking | Blades are supplied unmarked unless a marking method is agreed in writing |
| Compliance | RoHS and REACH compliant materials and process chemistry |
Quality Control
- Material certificate and incoming inspection for each production lot.
- First-article check against the approved drawing before a batch is released to production.
- In-process monitoring of etch depth, edge condition and feature size.
- Final dimensional and edge inspection.
- Lot-based traceability from raw strip to packed carton.
Typical Applications
- Single-use surgical and diagnostic instruments.
- Laboratory, pathology and sample preparation equipment.
- Medical device assemblies that need thin, flat cutting components.
- Film, foil, tape and label converting lines.
- Textile, paper and packaging cutting stations.
- Precision trimming and slitting equipment in electronics production.
Working With Your Engineering Team
- Design freedom – blade outlines, edge profiles and hole arrays come from digital artwork, so revisions do not require new dies.
- Thin material capability – parts that are too thin or too delicate for stamping or grinding can be etched and handled flat.
- Batch repeatability – the same artwork and process route are re-used, which keeps geometry consistent between orders.
- One partner for the chain – etching, optional finishing, inspection and packing are coordinated in-house.
Ordering Notes
Cutting blades are made to customer drawings, so every project is reviewed individually. Blade geometry, material grade, thickness, edge requirement, quantity and packing method all influence the manufacturing route. Please share the drawing (2D PDF or DXF), material and thickness, the cutting duty, and the expected order pattern. Our engineers will review feasibility of the etched geometry and reply with the proposed process route together with the commercial details for that specific project.
FAQ
Q: Can etching replace the stamping process we use today?
A: For thin material and complex outlines it often can, because no die is needed and the edge is formed without mechanical shear. Whether it suits your part depends on thickness, tolerance and quantity, so the drawing is reviewed case by case.
Q: Can micro holes or lubrication slots be added to the blade?
A: Yes. Holes, slots and surface patterns are etched in the same operation as the outline, so they add no separate process step.
Q: How is the cutting edge finished?
A: The edge comes out of the etch burr-free. Depending on the application, an additional honing or coating route can be arranged and will be defined during the drawing review.
Q: Which materials do you work with?
A: Austenitic and martensitic stainless steels, high-carbon steel, titanium and several other thin alloys. If the grade you need is unusual, the material certificate and thickness are reviewed before committing to the process.
Q: How does a project start?
A: Send the blade drawing, material and thickness, the intended cutting application and your order pattern. The geometry is checked against etching limits and you receive a proposal for that specific part.
Contact
Share your blade drawing and application details with our engineering team to start the review. Custom etching projects are quoted individually against the drawing and quantity involved.

Product Highlights
Photo chemical etching service producing custom stainless steel cutting blades for medical, laboratory and industrial OEM projects, from drawing review to inspected and packed batches.
Precision-Etched Titanium Flow Plates for Heat Exchangers with High-Corrosion Resistance
Precision-Etched Titanium Flow Plates for Heat Exchangers with High-Corrosion Resistance Flow Plate Overview Xinhaisen Technology specializes in manufacturing high-precision chemically etched flow plates for plastic injection molding, die casting, and other industrial applications. Our flow plates ...
Precision Titanium Etching Services ISO Certified Metal Fabrication
13+ years expertise in titanium etching for aerospace, medical & industrial applications. ISO/IATF-certified , full-cycle solutions with competitive lead times. Get instant quote! Titanium Etching Services for High-Performance Applications Industries We Serve Our titanium etching solutions power ...
Custom Stainless Steel Bookmark Souvenir Crafts By Photo Chemical Etching
Custom Stainless Steel Bookmark Souvenir Crafts By Photo Chemical Etching Descriptions of Stainless Steel Bookmark Souvenir Crafts: Xinhaisen, specializing in precision metal fabrication through chemical etching for 13 years, addresses evolving design challenges in modern crafts. As design ...
Micro Needle Rollers For Stainless Steel Via Metal Etching Service 0.005mm Tolerance
Micro Needle Rollers for Stainless Steel Material via Metal Etching Fabrication Beauty Needle Micro Needles Rollers XHS produces bio-compatible micro-needles through etching, which feature ultra-smooth and sharp edges. Using advanced etching technology, these micro-needles achieve higher quality and ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.