Custom EMI Shield Frame Photo Etched Beryllium Copper PCB Shielding Part for Circuit Boards
Product Details
| Processing Technology: | Photo Chemical Etching | Materials: | Beryllium Copper, Copper, Brass, Stainless Steel 304/316, Nickel Alloy |
|---|---|---|---|
| Sheet Thickness: | 0.02 Mm - 1.5 Mm | Tolerance: | +/- 0.03 Mm |
| Minimum Etched Hole: | 0.03 Mm | Minimum Line Width: | 0.015 Mm |
| Frame Form: | Flat Frame, Half-etched Or Formed Per Drawing | Assembly: | Solder, Clip Or Gasket Mounting |
| Highlight |
Custom EMI Shield Frame,Beryllium Copper PCB Shielding,Photo Etched Circuit Board Part |
||
Product Description
EMI Shield Frame Made by Photo Chemical Etching
Custom thin-wall metal frames that sit on a printed circuit board, define the shielding boundary around a component or connector, and provide the contact surface for a shield cover or gasket.
1. What an EMI Shield Frame Does
A shield frame is the perimeter part of a board-level shielding system. It is soldered or clipped onto the PCB and forms a continuous conductive wall around the circuit that has to be isolated. A separate cover then snaps or is soldered onto the frame to close the enclosure. The frame therefore carries three functions at once: mechanical support for the cover, an electrical contact path to the PCB ground, and a defined outline that keeps the shielding volume predictable from design to production.
2. Where Frames of This Type Are Used
- RF and wireless modules on communication boards
- Connector and interface openings on PCB assemblies
- Camera, sensor and antenna zones in consumer devices
- Automotive electronic control units and battery management boards
- Medical electronics and industrial control boards
- Wearables and compact IoT devices where board space is tight
3. What Etching Brings to Frame Design
- Narrow walls on thin stock: frame walls and small solder tabs can be etched in one piece from foil, without a progressive die
- Burr-free contact edges: no rolled burr on the ground contact surface, so the cover seats flat
- No mechanical stress: flat frames stay flat, which matters when the frame carries a gasket
- Half-etched details: steps, recesses and bending lines can be produced at reduced depth in the same pass
- Change without tooling: a revised outline or tab layout is an artwork change, not a new die
4. Production Route
- Drawing review: wall width, tab positions, hole sizes and material grade are checked against the etching window, and radii are added where sharp internal corners would otherwise be unetchable
- Phototool: the frame outline and apertures are imaged from your file
- Resist coating: both faces of the metal strip are laminated with photoresist
- Exposure and development: the frame pattern opens on both sides
- Etching: material is dissolved to the required depth, including half-etched features
- Stripping and inspection: resist removal, optional forming or plating, then dimensional and visual checks on the finished frame
5. Working Range
| Parameter | Range |
|---|---|
| Materials | Beryllium copper, copper, brass, stainless steel 304 / 316, nickel alloy |
| Sheet thickness | 0.02 mm - 1.5 mm |
| Tolerance | +/- 0.03 mm, tighter by review for specific features |
| Minimum etched hole | 0.03 mm |
| Minimum line width | 0.015 mm |
| Frame form | Flat frame, or half-etched and formed features per drawing |
| Surface | Burr-free etched edges; plating or coating on request |
Values describe the capability of the etching line. The final wall width, tab layout and tolerance of each frame are confirmed against your drawing and assembly method.
6. Inspection
- Incoming material certificate and thickness check
- First-article measurement of outline, wall width and tab positions against the drawing
- 100% visual inspection of the frame series for edge condition and distortion
- Sampled check of half-etched depth where steps are specified
- Flatness check on frames that will carry a gasket or cover
- Production under ISO 9001, ISO 14001 and IATF 16949 management systems
7. What We Need for a Quotation
- Drawing or 3D file (CAD, STEP, PDF or DXF) with outline, wall width and tab layout
- Material grade and thickness, or the conductivity and spring requirement if the grade is still open
- Quantity per order and whether a prototype stage comes first
- Assembly method (solder, clip or gasket) and any plating requirement
- Board environment, so we can advise on material and coating
8. Custom Work Only
Shield frames are made to order, because every board outline, wall width and contact layout is different. Each request is quoted individually against the drawing, material and quantity, and the delivery schedule is fixed once those are agreed. Send your drawing and we will review it with you before pricing.

Product Highlights
Thin-wall EMI shield frames etched from beryllium copper, copper or stainless foil. Burr-free contact edges, half-etched features, made to PCB drawings.
Precision-Etched Titanium Flow Plates for Heat Exchangers with High-Corrosion Resistance
Precision-Etched Titanium Flow Plates for Heat Exchangers with High-Corrosion Resistance Flow Plate Overview Xinhaisen Technology specializes in manufacturing high-precision chemically etched flow plates for plastic injection molding, die casting, and other industrial applications. Our flow plates ...
Precision Titanium Etching Services ISO Certified Metal Fabrication
13+ years expertise in titanium etching for aerospace, medical & industrial applications. ISO/IATF-certified , full-cycle solutions with competitive lead times. Get instant quote! Titanium Etching Services for High-Performance Applications Industries We Serve Our titanium etching solutions power ...
Custom Stainless Steel Bookmark Souvenir Crafts By Photo Chemical Etching
Custom Stainless Steel Bookmark Souvenir Crafts By Photo Chemical Etching Descriptions of Stainless Steel Bookmark Souvenir Crafts: Xinhaisen, specializing in precision metal fabrication through chemical etching for 13 years, addresses evolving design challenges in modern crafts. As design ...
Micro Needle Rollers For Stainless Steel Via Metal Etching Service 0.005mm Tolerance
Micro Needle Rollers for Stainless Steel Material via Metal Etching Fabrication Beauty Needle Micro Needles Rollers XHS produces bio-compatible micro-needles through etching, which feature ultra-smooth and sharp edges. Using advanced etching technology, these micro-needles achieve higher quality and ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.