Micro perforated mesh filter are elements of a coarse cleaning system. They are widely common in systems for various purposes. Moreover, this type of filter is able to clean the device from dirt, rust and other impurities.
Today, there are many filters that differ in design, size and appearance. The standard design of such a product is a metal case with a mesh in it. The body is easy to make of brass, steel and other alloys. Industrial filters of this type are also made of composite materials.
The material allows you to work in environments with temperatures not exceeding 100 degrees. The main purpose of the micro perforated mesh filter is not to clean the system, but to protect it from large contaminants.
With the help of a grid, such a device captures and filters out particles of pollution. Moreover, the size of such particles depends on the mesh cell. Today you can find filtration meshes that can collect particles of dirt up to 0.2 mm. Industrial filters have a diameter of 80 to 500 mm.
"Mud collectors" divide by design, type of connection to the device and type of cleaning. By design, such products divide into:
Straight lines are easy to install on a horizontal section of the device. micro perforated mesh filter with an oblique housing are more versatile. They are easy to install at various angles. But direct products are more reliable.
Moreover, according to the type of connection, such products come into flanged and coupling. The first type of "mud collector" attaches to the pipe with nuts. Bolts and studs are common to fasten sleeve filters. Therefore, they are more difficult to dismantle for maintenance.
Another classification allows us to divide such devices into flushing and non-flushing. Flushing varieties of water micro perforated mesh filter allows you to service such devices without dismantling and replacing the grid. For cleaning non-flushing structures, manual labor is common.
Moreover, such cleaning systems are common in devices pumping various media:
These types of filters are widely common at gas stations or oil refineries. Grids with a smaller cell diameter are common to filter water, steam or gas.
Moreover, for domestic needs, "mud collectors" with a throughput of 20-100 microns are common. Industrial filters are equipped with such grids capable of retaining particles of 400-500 microns.
The micro perforated mesh filter element comes of special alloys that are not afraid of pressure and high temperatures. In central water supply systems, grids are common that can withstand temperatures up to 12 degrees.
More complex designs install where it is important to quickly remove contaminants from the system. To do this, they are equipped with an automatic flushing system. For this, a special drive is common, which activates the movement of the damper.
Moreover, the presence of a drain hole will allow you to remove particles of dirt and other inclusions retained by the mesh from such a product.
Very often, mesh filters are complemented by cartridges and more complex fine cleaning systems.
Moreover, the main task of mesh filters is the initial coarse cleaning of liquid and gaseous media. The use of such systems in devices allows to achieve many advantages:
Moreover, mesh filters allow you to protect the system from various troubles associated with large particles. They will extend the life of your plumbing and reduce the cost of subsequent cleaning steps.
When choosing such a filtering device, it is important to consider the following nuances:
Moreover, not only has the type of construction depended on this parameter, but also the ability to use a flush or non-wash filter. In household systems, an oblique non-flushing micro perforated mesh filter has proven itself well. Depending on the intensity of use, it requires maintenance every three to five years.
It is possible to maintain the effective operation of the filter only with timely cleaning of the mesh element. To do this, remove the mesh and rinse it under running water. Moreover, if you are using this type of filter in your home's water supply, shut it off, unscrew the filter, disassemble it, and service it. Then assemble the filter in reverse order and install it in the system.
The most modern coarse filtration systems can equip with an automatic cleaning device. When the micro perforated mesh filter does not need to remove or change to restore its performance. It washes from accumulated contaminants through the operation of an automatic system controlled by the operator.
Along with mesh filters, cartridge filters with a different, more capacious and complex device are common.
The main and priority purpose of filtration systems of the first degree of water purification and other contents of devices is the filtration of coarse mechanical particles. Moreover, this implies a whole range of advantages from micro perforated mesh filter use, both for private users and for companies servicing such systems:
The installation of micro perforated mesh filter is a mandatory measure for high-quality cleaning and ensuring the required level of safe operation of devices of any size and diameter.
Moreover, the first degree of filtration allows you to achieve reliable and efficient cleaning of the contents of the device at subsequent stages, in order to obtain the cleanest consistency common in everyday life and production.
When choosing mesh filtration systems, the following parameters should be considered:
